LIST OF BUGS (FIXED FOR FOLLOWING VERSION) FOR IBIS_CHK YES NO Version 2.1.10 X BUG1 Multiple Disclaimers X BUG2 Package Model Warning Message for Legal Suffixes X BUG3 Incorrect [Model] Sub-parameter Syntax Not Reported X BUG4 Printout Version No. Version 2.1.11 ----- X BUG5 Additional Value Checking X BUG6 Output Control X BUG7 Check of VI Curves Against Waveforms X BUG8 Reserved Words Used as Pin Numbers Generate Errors X BUG9 Crash if Keyword Associated with [Model] Comes First X BUG10 Crash if Parser Encounters Empty V/I Table X BUG11 Parser Continues after [End] Keyword X BUG12 Lines Greater than 1024 Characters Cause Wrong Line Numbers X BUG13 Parser Crashes if Error in Line Longer than 256 Characters X BUG14 Long Illegal Keyword Prints Meaningless Message X BUG15 "Program Bug" for Version 1.1 Files with more than 512 Pins X BUG16 [Package] Argument Does Not Give Error X BUG17 Incomplete [Pin] L_pin, C_pin, R_pin Error Message X BUG18 Other Order R_pin, L_pin, C_pin Columns Not Correctly Read X BUG19 "typ" Data Outside "min" "max" Not Reported As Warning X BUG20 Crash with Multiple Filename Extensions under Windows95 X BUG21 Drive Warnings for Columns with "NA" Data X BUG22 Empty [Rising Waveform] of [Falling Waveform] Causes Crash X BUG23 An Empty [Pullup], [Pulldown] with Waveform Table Crashes X BUG24 No Error Report in first [Define Package Model] *1 BUG25 Keyword as First word in [Notes] causes Error X BUG26 Parser Crashes when calling [Package Model] X BUG27 Line with 80 Spaces Causes Crash X BUG28 Endpoint Missed Due to Floating Point Precision Versions 2.1.14, 2.1.15 2.1.17 (ibischk2+) (*1 Means fixed in a later version) Version 3.1 ----- X BUG25 Keyword as First word in [Notes] causes Error X BUG29 n\, \r, \r\n Line Terminators Need to be Handled. X BUG30 [Pin Mapping] Checks are too Simplistic X BUG31 Error for [Pulldown] Decreasing Current Should be Warning X BUG32 Package Model Lumped and Distributed Syntax Not Correct X BUG33 Infinite Loop with Decreasing V/I Bad End Voltage X *2 BUG34 No Error Reported for Missing V/I Tables in Output Buffers X BUG35 Model Spec Crash Related to Vinl and Vinh Being Specified X BUG36 Reserve Words Error for Pin Mapping and Series Pin Mapping X BUG37 Pin Mapping for Unique GND or POWER Pin Generates Error X BUG38 Ver. 2.1 File Names Greater than 8 Characters Not Reported X BUG39 No Warning is Given for Repeated Voltages in I-V Tables X BUG40 Incorrect Error Message for Series Terminators X BUG41 Issue Warning Instead of Error for Common Differential Pin X BUG42 Warning Message for Outputs with thresholds Needed X BUG43 Error for Zero or Negative dV/dt Ramp Data Needed X BUG44 Warning for Parasitic Resistance Set Too High at 1000 Ohms X BUG45 GND* and POWER* Nets Generate Errors in EBD Files X BUG46 Warning Message Missed for Typ Outside of Min and Max X BUG47 Change Waveform Mismatch Warning to Error and Warning Version 3.2 (Version 3.2.6) (X *2 BUG34 Implimented Incorrectly, Still Open) ---- X BUG34 No Error Reported for Missing V/I Tables in Output Buffers X BUG53 BUG34 is Incorrectly Fixed in Version 3.2.6 Version 3.2 (Version 3.2.7) ----- X BUG48 Warning Message for Vref, Cref, Rref, Vmeas in Wrong Models X BUG49 Warning Message for Unreferenced Models, Submodels X BUG50 Error Message for Out of Order C_comp Values X BUG51 Error Message Needed for Missing [Submodel] X BUG52 IBISCHK3 Hangs for [Add Submodel] Instead of [Submodel] X* BUG53 BUG34 is Incorrectly Fixed in Version 3.2.6 X BUG54 Corners with NA Give Bad Test Load Warnings X BUG55 Control-Z Can be Used as End-of-File X BUG56 Parser Fails to Detect Always Flowing Current X BUG59 Crash with Decimal Points for [Package] Subparameters Version 3.2 (Version 3.2.8) (X* BUG53 Fixed in an Earlier Version) ----- X BUG57 Non-Monotonic I-V Table Causes Waveform End Point Test Fail X BUG58 Wrong Bug Number for Missing R,L,C_pkg Subparameter(s) X* BUG59 Crash with Decimal Points for [Package] Subparameters X BUG60 Incorrect Series Function Table Order Dependency X BUG61 Parser Fails to Flag Missing [Series Switch Groups] Table X BUG62 Not All Non-Montonic Points Reported X BUG63 Some BUG47 Reported Waveform Percentages Wrong X BUG64 Error with Four [Driver Schedule] Entries X BUG65 Change P/NMOSFET Series Element Error to Warning X BUG66 Improve Truncation of Long File Name X BUG67 Phantom Warnings Use Wrong Line Numbers and then Disappear Version 3.2 (Version 3.2.9) (X* BUG59 Fixed in an Earlier Version) ----- X BUG69 Error in EBD Path with Power Pin X BUG70 [Model Selector] Fails for [Series Pin Mapping] Models X BUG71 Monotonic Checking for Combined I-V Tables X BUG72 Tab Warning Message Promotion X BUG74 Missing Timing Test Load Warning Messages X* BUG75 Successive EBD Checking Crashes Automated Checker X* BUG76 External Package Under Win32 Requires Writeable Root X BUG77 Test for Series* Models in [Pin] Error X BUG78 Clamp Current Double Counting Test X BUG79 Program Bug in [Submodel Spec] Array X** BUG80 Error Message with [Model Selector] Placement X? - Not fixed in Version 3 files tested by ibischk4 X* - Code change implemented, but not tested by originator X** - Decided not to fix after Version 4.0.2 Version 4.0 (Version 4.0 - beta) ----- X BUG68 False Messages with Repeated Voltages X BUG73 Extreme Non-Monotonic I-V Table Fails End-Point Test X BUG81 Waveform Mismatch Error with Small Voltage Step Version 4.0_beta (Version 4.0.1) ----- X*2 BUG82 Waveform Mismatch Error for Open Source/Drain Version 4.0 (Version 4.0.2) Version 4.1.0 (X*2- BUG82 omitted in release) ----- X*2 BUG82 Waveform Mismatch Error for Open Source/Drain X BUG85 Incorrect Header in wvfm.h X BUG87 Re-enter BUG82 Fix Version 4.1.1 (X*2-BUG82 fixed in release) ----- X BUG86 Inappropriate Compilation Options X BUG88 Version GLIBC_2.3 Not Found in ibischk4 Version 4.1.1 X BUG89 Compiled Source Causes EBD Error from Missing DEFINES Version 4.2.0 ----- X BUG83 Parser Permits Pin-only [Pin Numbers] Entries X BUG84 Parser Crashes with No Arguments to [Pin Numbers] X BUG90 Parser Permits Vmeas Not Between Vinh and Vinl X BUG91 Non-zero Currents in Unused Open_* Model I-V Tables X BUG92 Non-monotonic Warnings for [Submodel] Dynamic_clamp X BUG93 Single-ended Threshold Warnings for Differential Models X BUG94 Non-monotonic Warnings for Combined Tables in all Versions Version 4.2.1 ----- X BUG95 Incorrect Differential Pin Assignment Warning X BUG96 Put Line Numbers in Note Text X BUG97 Reduction in Notes+Warning versus Earlier Warning Count X BUG98 Code Changes for Robustness Version 4.2.2 ----- X BUG100 Incorrect Ordering of [Circuit Call] X BUG102 Adding Numbers to Errors, Warnings and Other Messages Version 5.0.0 ----- X BUG108 IBIS 4.2/5.0 Message Differences for Multi-lingual Models Version 5.0.1 ---- X BUG109 AMI Model Type String Not Supported X BUG110 Wrong D_overshoot_ampl_* Subparameter Spelling X BUG111 CRLF Should be Supported within AMI Syntax Version 5.0.2 ----- X BUG113 Segmentation Error in V5.0.2 Compilation Version 5.0.3 ----- X BUG99 Misleading Text in [Node Declarations] Error Message X BUG101 No Warning for Unused [Model Selector] Name X BUG103 Driver Schedule Delay Value Tests X BUG105 Incorrect Error for [Model Selector] Description Field Length X BUG106 S_overshoot_* Invalid for Some Model_types X BUG107 Checking for [Ramp] dV_r and dV_f X BUG112 Wrong Message for AMI File Without Extension X BUG114 V4.X Name and Column Lengths for [Submodel] and [Model Selector] X BUG118 Vmeas Check with Version 4.2.1 and Beyond Failure X BUG119 Waveform Test Missing Results with Version 4.2.1 and Beyond X BUG121 Broken Missing [Component] Test Version 5.0.4 ---- X BUG115 [ISSO_PU] and [ISSO_PD] Mismatch Checks Not Done for Typ Column X BUG117 Debug Error with Missing Pin Numbers and Other Conditions Version 5.0.5 (not released due to incomplete BUG116, 123 fixes) ---- X BUG116 [ISSO_PU] and [ISSO_PD] Mismatch Checks Insufficent Resolution X BUG123 Wrong Cautions for [Ramp] dV Version 5.0.6 ---- X BUG104 Error With Same [Test Load] Name Under Different [Model] X BUG120 Unusued [Model Selector] Caution X BUG122 [Model Spec] Vref and Rref Values Ignored in Timing Load Check X BUG129 Identical [Composite Current] points erroneously required X BUG130 Program Closure with Case Sensitive Errors in Ramp Subparameters Version 5.0.7 -------------------------------------- PENDING BUGS BUG124 Erroneous Whitespace Requirement in .ami Files BUG125 Missing Basic Checks on .ami Files BUG126 Illegal Text After IBIS-AMI Parameters Not Reported BUG127 IBIS-AMI Fatal Error with Root Parameter Spurious Text BUG128 Repetition of Reserved Parameters and Model_Specific Sections Not Checked BUG131 Error for Rx_Clock_PDF Format Table BUG132 [Model Selector] under [Notes] Causes Program Close BUG133 IBIS-AMI Program Bug or Missing Error with Spurious Words